VHF/UHF Repeater

The VXR-5000 is a frequency-synthesized, microprocessor-controlled commercial-grade repeater designed to provide reliable, continuous 2-way communications over a wide range of environmental conditions. From single-use applications to large system and trunking configurations, the VXR-5000 integrates well into almost any communications system. Designed for easy installation in EIA-Standard 19-inch rack mount cabinets, the VXR-5000's rugged construction utilizes high-grade components throughout.

 

 

VXR-5000
VHF/UHF Repeater

The VXR-5000 is a frequency-synthesized, microprocessor-controlled commercial-grade repeater designed to provide reliable, continuous 2-way communications over a wide range of environmental conditions. From single-use applications to large system and trunking configurations, the VXR-5000 integrates well into almost any communications system. Designed for easy installation in EIA-Standard 19-inch rack mount cabinets, the VXR-5000’s rugged construction utilizes high-grade components throughout.

• Frequency Range:
  • VHF: 134-175 MHz (4 versions)
  • UHF: 400-512 MHz (5 versions)
• 25 Watts Power Output (Selectable)
• 12.5 Bandwidth available for selected versions
• CTCSS Encode/Decode
• Automatic Time-out and Hang-up Delay Timers
• 3 Year Warranty

SPECIFICATIONS
0
General Specifications
VXR-5000V
VXR-5000U
0 
VHF Highband
UHF Band
Number of Channels
8 Channels
Frequency Range
134-147 MHz (A)
400-420 MHz (A)
0 
146-160 MHz (B)
430-450 MHz (C)
0 
156-168 MHz (C)
450-470 MHz (D)
0 
164-174 MHz (D)
470-490 MHz (E)
0 
0
490-512 MHz (F)
Maximum Channel Spread
13 MHz (A)
20 MHz (A, C, D, E)
0 
14 MHz (B)
22 MHz (F)
0 
12 MHz (C)
0
0 
10 MHz (D)
0
Channel Spacing
25 kHz / 30 kHz (12.5 kHz optional)
Power Supply Voltage
100 / 117 / 220 / 235 VAC ; 13.8 VDC
Current Consumption  
Standby
500 mA DC
Receive
500 mA DC
Transmit
6.0 A DC
Ambient Temperature Range
-30°C to +60°C
Frequency Stability
± 2 ppm
RF Input-Output Impedance
50 ohms
Dimensions (H x W x D)
4.3" x 14.8" x 10.8" (110 x 375 x 275 mm)
Weight
26.4 lb. (12 kg)
0 
Receiver Specifications
Measurements made per EIA standard EIA-204D
Circuit Type
Double Conversion Superheterodyne
Sensitivity  
EIA 12 dB SINAD
0.35 µV
20 dB Quieting
0.45 µV
Threshold Squelch
0.20 µV
Adjacent Channel Selectivity
70 dB
Intermodulation
70 dB
Spurious and Image Rejection
75 dB
Conducted Spurious Emissions
57 dB
Audio Response
+3 / -8 dB from the 6 dB / oct. De-emphasis curve
Audio Output
Line level 600 ohm balanced
Hum and Noise
45 dB
0
Transmitter Specifications
Measurements made per EIA standard EIA-152-C
Power Output
25 W @100 % duty cycle
Modulation
16K0F3E (11K0F3E optional)
Maximum Deviation
± 5 kHz (± 2.5 kHz optional)
Conducted Spurious Emissions
80 dBc
FM Hum and Noise
45 dB
Audio Response
+1 / -3 dB from the 6 dB / oct. Pre-emphasis curve
Audio Distortion
<5%
 
http://www.yaesu.com/LM/repeat.html

VERTEX STANDARD US HEADQUARTERS
10900 Walker Street
Cypress, CA 90630
Phone: 714-827-7600
Fax: 714-827-8100

www.yaesu.com